Thanks be to you all and my Lord Jesus..
Each one of you have help me and i do so appreciate it. My 628 is now operable, and it is so wonderful.
This was my problem.
I was initially programming the 16f84 using MPLAB Assem. with PicStart Plus with upgrade. Then i bought PBP, which is so nice, and i changed to the 16f628. then using MIcroCode Studio i wrote a very simple piece to blink my LED. BUT .. NO blink.. I tried the 16f84.. NO blink.. WOW whats wrong. I tried 45 or 55 times .. NO. blink. I peruse to manuals. I went on internet. I called PBP, You've got to love them for they put up with such as i am. I joined this forum. I wrote the code in MicroCode Studio then selected "compile/Program". It would compile, then started up my MPLAB and leave me in the MPLAB screen. I would select my file. Set my config bits, and select my programmer, then program. There were NO errors, no issues. Also..NO blink. What it programmed into the chip, I have no idea. but it did programm and verify with no errors. What i did WRONG. When PBP brought up my MPLAB and I set my config bits, and selected my programmer.. I DID NOT compile my project in MPLAB.When PBP sends you to MPLAB, YOU have to compile the project. If you do not compile, it will programme something i know not what to the chip, but it will not work.. NOW my LED blinks.. Praise the Lord and thanks to you gentlemen soo much..
jlittle