Problem with A port on 18F2550

Results 1 to 19 of 19

Threaded View

  1. - 9th May 2007, 08:46 #15
    skimask's Avatar
    skimask Guest

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by NL2TTL View Post
    So you guys say shut down the watchdog timer. How can i do this?
    Can this be the reason that a other microprocessor board with same config and same sort of simple program hangs after a few days.
    1 - Reopen the same program you opened in Post #5 (MPLAB IDE)
    2 - Left-Click on the 'Configure' menu
    3 - Further click on 'Configuration Bits'
    4 - Press the down arrow on your keyboard 10 times
    5 - By now you should have '300003 1F Watchdog Timer Enabled' selected
    6 - Left-Click on the line that is now highlighted
    7 - Left-Click on the drop-down menu that appears
    8 - Left-Click on the words 'Disabled-Controlled by SWDTEN bit'

    2nd question - it's possible...

    Or you could turn up your WDT post-scaler.
    Last edited by skimask; - 9th May 2007 at 08:50.
« Previous Thread | Next Thread »

Similar Threads

  1. Array problem (18F2550)
    By Ronald123 in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 8th January 2008, 18:47
  2. Setting up Port b for I2C on 18f2550
    By rjones2102 in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 2nd October 2007, 20:22
  3. Microcontroller with 2 way paging application problem
    By oneohthree in forum mel PIC BASIC Pro
    Replies: 30
    Last Post: - 20th April 2007, 17:27
  4. PWM problem CCP2 port
    By NL2TTL in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 19th September 2006, 23:34
  5. COM port problem
    By andys280176 in forum Serial
    Replies: 0
    Last Post: - 19th January 2006, 16:42

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules