Problem with A port on 18F2550

[skimask]

Does the ">Start<" go out the serial port about every 2 seconds or so?

[NL2TTL]

This is a one time operation.

[skimask]

This is a one time operation.

I know it's a one time operation. That's the way you've written it in the program.
I'm asking if, while the program is in operation, do you get the ">Start<" out of the serial port about every 2 seconds or so?

[NL2TTL]

Yes every 2 seconds

[mister_e]

Out of curiosity, which PIC programmer do you use?

could you post your compiled .HEX file?

Make sure your MCLR pin is tied to Vcc via a resistor.

Seems to work as design here...

[NL2TTL]

I'm using a ICD2 compiler.

He're is the hex file

[mister_e]

OK i got the same problem here. Are you using the same code as in POST #1 ???

One thing is sure, if i disable the Watchdog timer, it works...