Problem with A port on 18F2550

Results 1 to 19 of 19

Threaded View

  1. - 7th May 2007, 20:18 #4
    mister_e's Avatar
    mister_e
    mister_e is offline Contributor
    Join Date
    Sep 2004
    Location
    montreal, canada
    Posts
    6,898

    Did you find this post helpful? Yes | No

    Default

    make sure that there's no possible Brown-out reset @20MHz and @3 V. Usually the datasheet show the minimum voltage for a given crystal speed.

    EDIT: nevermind.. misread your post.

    well you'll need to post your Config Fuses line OR send your compiled .HEX files.

    Make sure your ADCON setting is good as well.
    Last edited by mister_e; - 7th May 2007 at 20:21.
    Steve

    It's not a bug, it's a random feature.
    There's no problem, only learning opportunities.
« Previous Thread | Next Thread »

Similar Threads

  1. Array problem (18F2550)
    By Ronald123 in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 8th January 2008, 19:47
  2. Setting up Port b for I2C on 18f2550
    By rjones2102 in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 2nd October 2007, 21:22
  3. Microcontroller with 2 way paging application problem
    By oneohthree in forum mel PIC BASIC Pro
    Replies: 30
    Last Post: - 20th April 2007, 18:27
  4. PWM problem CCP2 port
    By NL2TTL in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 20th September 2006, 00:34
  5. COM port problem
    By andys280176 in forum Serial
    Replies: 0
    Last Post: - 19th January 2006, 17:42

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules