I don't understand this code!

Results 1 to 40 of 47

Threaded View

  1. - 6th May 2007, 18:19 #9
    Russ Kincaid's Avatar
    Russ Kincaid
    Russ Kincaid is offline Member
    Join Date
    Jan 2006
    Location
    New Hampshire, USA
    Posts
    107

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Pic_User View Post
    Hi Russ,



    It looks like you WANT the output to be HIGH for three time increments and LOW for one. (See attachment.) http://www.picbasic.co.uk/forum/atta...1&d=1178466510
    Is the waveform LOW for three time increments and HIGH for one?

    -Adam-
    Exactly right. Why does it do that?
    BTW, GPIO.0 produces the positive half of an AC signal while GPIO.1 produces the negative half. The result is an AC that reads the same on a true RMS meter or one that reads 0.7 of the peak.
    Last edited by Russ Kincaid; - 6th May 2007 at 18:24.
« Previous Thread | Next Thread »

Similar Threads

  1. Reading in Manchester code
    By brid0030 in forum Code Examples
    Replies: 0
    Last Post: - 10th March 2009, 21:55
  2. How much code space do PBP statements use.
    By Darrel Taylor in forum Code Examples
    Replies: 5
    Last Post: - 13th February 2009, 21:31
  3. Loop with two motor and 2 sensors
    By MrRoboto in forum mel PIC BASIC
    Replies: 4
    Last Post: - 8th December 2008, 23:40
  4. Making Program Code Space your playground...
    By Melanie in forum Code Examples
    Replies: 15
    Last Post: - 19th July 2008, 08:26
  5. Re-Writing IF-THEN-AND-ENDIF code?
    By jessey in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 18th August 2006, 17:23

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules