Max/232 Bootloader problems - Schematic attached...


Closed Thread
Results 1 to 20 of 20

Hybrid View

  1. #1
    skimask's Avatar
    skimask Guest


    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Joe S. View Post
    Skimask, did you see that ?
    JS
    Yep...'bout crapped myself too

  2. #2
    Join Date
    Oct 2004
    Location
    New Hampshire
    Posts
    76


    Did you find this post helpful? Yes | No

    Default

    Alright... let me re-phrase that.

    Thank you Skimask for your help and polite comments! And again let me say how much I appreciate all who contributed to the correction of my most dispickable mistakes.

    GEEEEZZZZZZZZZEEEEE!

    :-)
    Never enough knowledge to be called intelligent but just enough knowledge to be considered dangerous!

    I like that! :-)

  3. #3
    skimask's Avatar
    skimask Guest


    Did you find this post helpful? Yes | No

    Thumbs up

    Quote Originally Posted by rossfree View Post
    Alright... let me re-phrase that.
    Thank you Skimask for your help and polite comments! And again let me say how much I appreciate all who contributed to the correction of my most dispickable mistakes.
    GEEEEZZZZZZZZZEEEEE!
    :-)
    It's all good...no sweat...

  4. #4
    Join Date
    Aug 2006
    Location
    Look, behind you.
    Posts
    2,818


    Did you find this post helpful? Yes | No

    Default Re:geeeezzzzzzzzzeeeee!

    Quote Originally Posted by rossfree View Post
    Alright... let me re-phrase that.

    Thank you Skimask for your help and polite comments! And again let me say how much I appreciate all who contributed to the correction of my most dispickable mistakes.

    GEEEEZZZZZZZZZEEEEE!

    :-)
    Hi rossfree
    I wasn't woofin' on you ! Old skimask has taken some heat lately from a few nonreaders of the holy green book, and I was pointin' out that someone appreciated him. Oh and there are no dispickable mistakes, a few dipstickable ones perhaps, but those only prove humanity
    Last edited by Archangel; - 3rd May 2007 at 21:12.
    If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
    .
    Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
    .
    There simply is no "Happy Spam" If you do it you will disappear from this forum.

  5. #5
    skimask's Avatar
    skimask Guest


    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Joe S. View Post
    Old skimask has taken some heat lately from a few nonreaders of the holy green book, and I was pointin' out that someone appreciated him.
    That's the facts...
    I'll take a flipped part on a PCB anyday over a non-believer/non-reader/non-digestor of the information in the holy green book...not to mention the teachings of the great PBprophets 'DT', 'Mr_E', and 'Melanie' and the writings contained herein...
    All MUST bow to their wisdom and their teachings...for they are the truth and the truth shall set your hardware free to do your bidding.
    Lessor PBprophets, if I may consider myself that, well, maybe you'll take what I say with a grain of salt and a skeptical eye...over a beer...next to the bonfire...with a shot of tequila

  6. #6
    Join Date
    Oct 2004
    Location
    New Hampshire
    Posts
    76


    Did you find this post helpful? Yes | No

    Default

    Skimask, there for a minute I was looking for a lamb to slaughter. Your words made me ssshhhhiiiivvvverrrr... no wait... I had my had on the fuse block. Made me think I should be naked with lit candles all around, sitting on a rough stone floor with my legs crossed...

    but then I came to my senses... and went back to watching Opra.

    I do this stuff as a hobby... It allows me to play at work once in a while. Mostly I'm a mechanical guy. I've designed lots of machines with electronics guru's doing my bidding. **evil laugh**

    I especially liked hearing my electronics co-worker, guru, companion, best friend... comment that when we finished designing and building a machine, everyone would coo and ahh about how cool the machine (that I designed!) looked and worked. He said nobody appreciated his work... the electronics inside the machine that made all of those things play.

    I said to him, "That's because electronics are SUPPOSED to work."

    HA HA HA HA HA HA HA HA HA!!!

    He was a good sport! And he taught me pretty much everything I know about electronics. I'm nowhere near his level. I don't pretend to be. The little I know allows me to piddle with processors and programming. That's enough. I'm happy.

    I don't wear a watch cause everyone else wears one. I don't own a cell phone cause in an emergency there's always one around...

    And there's this forum. Need I say more?

    Life is good.

    Ross
    Never enough knowledge to be called intelligent but just enough knowledge to be considered dangerous!

    I like that! :-)

  7. #7
    skimask's Avatar
    skimask Guest


    Did you find this post helpful? Yes | No

    Default

    Well, there ya go...
    Now go break something....and fry something else, let all the magic smoke out of it!!!!

Similar Threads

  1. PIC18F4680 bootloader
    By vinyl_theif in forum General
    Replies: 1
    Last Post: - 29th January 2009, 17:45
  2. 18F4550 Bootloader enter via eeprom setting
    By bradb in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 22nd November 2008, 23:51
  3. bootloader Freqout problems
    By handgio in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 5th December 2007, 13:38
  4. USBDemo with Bootloader
    By vacpress in forum USB
    Replies: 4
    Last Post: - 25th January 2007, 22:29
  5. Bootloader Problems
    By rossfree in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 11th February 2005, 17:51

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts