countdowntimer with dual 7segment display with 16f628a

[mister_e]

Case dependant i guess. For many, the pricing range is more 2500-5000 to start thinking of doing something.

[T.Jackson]

I'd probably do this project with the inclusion of a PCB for about $350. It's a no brainer and the requirements are very clear.

[Melanie]

You're close. I don't do projects under $5K.

I know one German (mechanical/pneumatics) engineer who sits on a beach in Rio all his life and doesn't move off it for under $10k.

So I suppose in comparason I'm cheap...

As for the Dental Timer, my Dentist already has an integral timer on his curing light... so Dr.Ragh has probably bought the budget model. Most impressed last week when I had one of those orbital X-Rays done - where the whole X-Ray device spins around your head and a few moments later a panoramic image appears on the LCD next to your seat... very sexy (Dentist wasn't bad either!).

[dr.ragh]

well jak iam not trying to sell this project , its my own personal project, as iam verymuch intrested in to elecctronics i want to build it myself and its just a hobby

i would appreciate if you could help me with the code

anyways tnakyou for the help you offerd me

[T.Jackson]

Disregard post.

[Acetronics2]

Hi,

I do think buying a couple of "Hong kong" made kitchen digital timers would do the job for MUCH less than the 250 $ ... even AU$

...

Now, all is upon the display size ...

Think with head before than with credit card ... LOL !!!

Alain

[T.Jackson]

Disregard post - (was highly intoxicated)

[Acetronics2]

Hi, Dottore

Here is a fairly good starting basis ...

http://g.fondeville.free.fr/labo.html#minut

after translation and minor mods !!!

Alain

PS " Darkroom timer" is THE Google search ...

[Acetronics2]

Australia is the <strong> BEST</strong> country in the World. You have no bloody idea what you're talking about.

Hi, Trent

Would you mean coz there's some magic left there ???

Electronic spirit might have been over your head, then ... may be he is very busy.

" You have no bloody idea what you're talking about " ... I've been reading you here, that's more than enough !!! LOL ...

Alain

PS: don't worry, but I prefer New Zealand ... even if their awful accent need a Singapore - London flight to begin to be heard ...

[T.Jackson]

well jak iam not trying to sell this project , its my own personal project, as iam verymuch intrested in to elecctronics i want to build it myself and its just a hobby

i would appreciate if you could help me with the code

anyways tnakyou for the help you offerd me

Disregard post - (was highly intoxicated)

[malc-c]

well jak iam not trying to sell this project , its my own personal project, as iam verymuch intrested in to elecctronics i want to build it myself and its just a hobby

i would appreciate if you could help me with the code

anyways tnakyou for the help you offerd me

I'm confused (easy to do I know !)

In one post you want to do this yourself, then in another you want someone to do it for your ? I'm also gobsmacked that people have offered to do this for you for free... normally you only get help when you can show people what you've written and what hardware schematic you are prototyping as people here like to reward those who put some effort in.

The down side is that having someone else develope the project for you is that you'll never learn how to write programs or develope electronic projects.

However, you now have to make a choice. Try developing this yourself, take up TJ's offer and buy the guy a beer, sell the car and pay Mel to do it for you (sounds like she's inkling for a week or two in Rio ) or simply but a new unit with built in timer

[dr.ragh]

well mel the orbiting xray u described is called OPG ( ortho pantamogram)

it takes full mough xray from your r side to l side ( it also takes images of the skull too ( just for knowledge)

its a great thing to work with ( but high radiation exposure is a risk)

any ways iam making my own light curing unit as i cant find all the features i want in the branded one.....


well mr. sarma iam from hyderabad too . i live in kukatpally ,
i would like to take some help from u if u r like minded

[mvs_sarma]

Hi Dr.Ragh,

Nice to know another PIBASIC member , that too from Kukatpally.
you may reach me at 94401 54650
in order to see where your posts have gone, right click your name adjecent to any post and select 'all previous post from this person'

thanks