I had a similar problem and it was solved by connecting earth grounds as close to the boards as possible and adding an earth ground from the mains before the transformers.
Sinked the inductance.
|
I had a similar problem and it was solved by connecting earth grounds as close to the boards as possible and adding an earth ground from the mains before the transformers.
Sinked the inductance.
Dave
Always wear safety glasses while programming.
|
Snubbers
Thank you Mackrackit.
I already have earth grounds as you suggested.
Also connected in one point only.
Any idea?
|
can you post some picture and schematic of it?
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Snubbers?
Thanks Steve.
Actually you already had some idea on this my project a while ago.
The schematic is actually already there:
http://www.picbasic.co.uk/forum/show...4177#post24177
If it will be needed, I will try to post also pictures as soon I get assembled another machine.
Thank a lot.
|
Yeah some installation and board picture (top/bottom) would be nice
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks