How to set up UART??

[skimask]

I forgot to say that I dont run the pic at 10Mhz as I said erlier.
I use HSPLL function and run it at 40MHz.
/JKBPower

Then you have to DEFINE OSC 40 'cause it's running at 40Mhz, not 10Mhz

[jkbpower]

Yes, I use OSC 40.
But still not working as it should.
Maybe I have something wrong in my design with the MAX232 curcuit.
I will do a check to if it works.

[jkbpower]

Hi again,
hmm.. its a little embarrassing.
I´ve got it working now.
I just had to shift the RX and TX line on the RS232 cable. hehe.
I took the scope and saw that both my pic and the PC tried sending data on same line.
But I got lot of help from you anyway. Like this PicMultiCalc software :-)
/JKBPower