Strange SerOut Problem

Results 1 to 40 of 40

Threaded View

  1. - 21st April 2007, 07:11 #17
    paul borgmeier's Avatar
    paul borgmeier
    paul borgmeier is offline Senior Member
    Join Date
    Feb 2003
    Location
    Salt Lake City, Utah USA
    Posts
    517

    Did you find this post helpful? Yes | No

    Smile

    You show VSS = -5V on your sketch. It should be VSS = 0V

    ALso, If you have nothing between your +5.0V power supply and your PIC, then you should measure +5.0V between VDD and VSS on your PIC (not 3.5V).

    EDIT: it sounds like a grounding problem just like you suspected
    Last edited by paul borgmeier; - 21st April 2007 at 07:13. Reason: see EDIT:
    Paul Borgmeier
    Salt Lake City, UT
    USA
    __________________
« Previous Thread | Next Thread »

Similar Threads

  1. A Serial GLCD 128x64 Simple Project
    By Oldspring in forum Off Topic
    Replies: 0
    Last Post: - 8th March 2010, 20:58
  2. Serout to serial servo
    By azmax100 in forum mel PIC BASIC Pro
    Replies: 20
    Last Post: - 12th August 2009, 16:46
  3. Strange Serout Behaviour
    By bluesmoke in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 12th August 2009, 04:12
  4. Advice-scrutiny for my serial controller
    By kevlar129bp in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 13th December 2008, 17:11
  5. Problem interfacing ADXL202 and Accustar Clinometer with 16F876A
    By Beatrix in forum mel PIC BASIC Pro
    Replies: 11
    Last Post: - 13th July 2005, 19:26

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules