Microcontroller with 2 way paging application problem

Results 1 to 31 of 31

Threaded View

  1. - 18th April 2007, 17:32 #13
    oneohthree's Avatar
    oneohthree
    oneohthree is offline Junior Member
    Join Date
    Mar 2007
    Posts
    42

    Did you find this post helpful? Yes | No

    Default

    In the receiver code I posted in post #6 only a code of 1101 works.
    In the receiver code I posted in post #7 1100, 0101, 0100 works but not 1101. In all these cases the forward link (434 MHz) works all the time (in the cases where the first two bits (address) are different I changed the two bits (B0, B1) that are hardcoded in the code so that everything will work) but the reverse link (315 MHz) works only for the combinations I specified above.
    Last edited by oneohthree; - 18th April 2007 at 17:34.
« Previous Thread | Next Thread »

Similar Threads

  1. PIC KIT 2 writing problem ?
    By KaanInal in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 3rd January 2010, 12:59
  2. Unusual Interrupts Application Problem
    By Joe Rocci in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 8th May 2009, 11:55
  3. PIC 16LF722 + PIC KIT 2 //configuration problem
    By pomerol in forum General
    Replies: 7
    Last Post: - 15th December 2008, 05:18
  4. PWM Problem
    By cihhan in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 14th June 2008, 18:43
  5. LCDout and large filesize 18F452 -> paging problem?
    By mara in forum General
    Replies: 18
    Last Post: - 24th January 2008, 22:44

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules