I cleaned up my microcontroller codes. I am doing serout only once this time with 4 $55 and 1 $aa in the preamble. The problem now is my PIC to PIC communication works perfectly with a wire. But when I connected them to the TLP-315 and RLP-315 transmitter and receiver pairs it either does not work or works intermittently. I told the receiver to count for $55 four times. I am using a breadboards. On one breadboard I have a 315 MHz receiver and 434 MHz transmitter and the other breadboard I have a 315 MHz transmitter and 434 MHz receiver. After I get this problem fixed I will be putting it on a PCB. I have been trying all different combinations for the past week but it seems like my 315 MHz receivers are not working like they should.
I do not know what is wrong I am basically doing the same thing in both links but one link works while the other does not. My link from 434 mhz transmitter to 434 mhz receiver is working but my link from 315 mhz transmitter to 315 Mhz receiver is working intermittently. I am using both PIC16F84A and PIC16F88. Is this a PIC problem or a RF module problem.
Transmitter
'IEEE Encoding
'Transmitter Code
Include "Modedefs.bas"
trisb = 0
main:
u var byte : counter var byte : encode var byte : u = %1000
'u is the byte containing the input in binary, counter is a byte that describes the amount of bits to encode
'encode is the variable holding the encoded value
'Manchester encoding
For counter = 0 to 3
If u.0[counter]=0 Then
encode.0[counter*2]=0 : encode.0[counter*2+1]=1 'If it is a zero make the first bit 0 and second bit 1
Else
encode.0[counter*2]=1 : encode.0[counter*2+1]=0 'If not then make first bit 1 and second bit 0
EndIf
Next counter :
write 0, encode 'Write to EEPROM Location 0
High 1 'High on Port B Pin 1
Pause 1000 'Pause
Low 1 'Low on Port B Pin 1
serout PORTB.0, n2400, [ $55 , $55 ,$55, $55, $aa , encode ]: 'send out preamble and encoded from Port B Pin 0
goto main
Receiver (434 to 315)
Include "Modedefs.bas"
ct55 var byte: encoded1 var byte: s var byte: counter var byte: e var byte: action var byte:
encoded var byte: encoded2 var byte: action2 var byte: B0 var bit: B1 var bit: B0=1: B1=0
s=0: e=0: encoded1=0: counter = 0: action=0: action2=0: encoded=0: encoded2=0:
Main:
Clr:
s=0: e=0: encoded1=0: action=0: action2=0: encoded=0: encoded2=0
Maina:
ct55=0 'counter for $55 is zero
Wait55:
serin PORTB.0, n2400, encoded1
If encoded1 = $55 Then
ct55 = ct55 + 1
If ct55 = 4 Then goto Waitaa
Else
goto Maina
Endif
goto Wait55
Waitaa:
serin PORTB.0, n2400, encoded1
If encoded1 <> $aa Then goto Maina
serin PORTB.0, n2400, encoded1
write 0, encoded1
For counter = 0 to 3 : s.0[counter] = encoded1.0[counter*2]:Next counter
write 1,s
e = s:
If ((e.3=B0) and (e.2=B1)) Then
goto L3
Else
write 2, s
goto Clr
Endif
L3:
If((s.1=0) and (s.0=0)) Then
action=s:
action.1=1
write 3, action
High 6
Pause 1000
Low 6
For counter = 0 to 3
If action.0[counter]=0 Then
encoded.0[counter*2]=0 : encoded.0[counter*2+1]=1
Else
encoded.0[counter*2]=1 : encoded.0[counter*2+1]=0
Endif
Next counter:
write 8, encoded
Low 4
For counter = 0 to 4
Pause 400
High 4
Pause 400
Low 4
Next counter:
'For counter = 0 to 5
serout PORTB.2, n2400, [$55,$55,$55,$55,$aa, encoded]
goto Clr
'Next counter:
Endif
If ((s.1=0) and (s.0=1)) Then
action2 = s: action2.1 = 1:
write 4, action2
High 5
Pause 2000
Low 5
For counter = 0 to 3
If action2.0[counter]=0 Then
encoded2.0[counter*2] = 0: encoded2.0[counter*2+1] = 1
Else
encoded2.0[counter*2] = 1: encoded2.0[counter*2+1] = 0
Endif
Next counter:
write 9, encoded2
Low 4
For counter = 0 to 4
Pause 400
High 4
Pause 400
Low 4
Next counter
Low 1
For counter = 0 to 10
Pause 400
High 1
Pause 400
Low 1
Next counter:
'For counter = 0 to 5
serout PORTB.2, n2400, [$55,$55, $55, $55,$aa, encoded2]
goto Clr
'Next counter
Endif
End
Receiver code (315 Link)
Include "Modedefs.bas"
ct55 var byte: encoded1 var byte: s var byte: counter var byte: e var byte:
s = 0: e = 0: encoded1 = 0: counter = 0:
Main:
Maina:
ct55=0 'counter for $55 is zero
Wait55:
serin PORTB.0, n2400, encoded1
If encoded1 = $55 Then ct55 = ct55 + 1
If ct55 = 4 Then
goto Waitaa
Else
goto Wait55
Endif
'goto Wait55
Waitaa:
serin PORTB.0, n2400, encoded1
If encoded1 <> $aa Then goto Maina
serin PORTB.0, n2400, encoded1
write 0, encoded1
For counter = 0 to 3 : s.0[counter] = encoded1.0[counter*2]: Next counter
write 1,s
If (s.1=1) Then
goto L4
Else
write 2,s
High 2
Pause 1000
Low 2
goto Maina
Endif
L4:
e = s
write 3, e
High 1
Pause 1000
Low 1
serout PORTB.3, n2400, [e]
goto Maina
End
Bookmarks