PIC16F877A - Timer0 won't interrupt

[WishMaster^]

Hello all!!
An update and help request on my program:

define loader_used 1  
define osc 20 

;---Defining Variables---
wsave var   byte $70 system
ssave var   byte bank0 system
psave var   byte bank0 system       

count0  var byte bank0 system
count1  var byte bank0 system
count2  var byte bank0 system
count3  var byte bank0 system  
count4  var byte bank0 system
count5  var byte bank0 system
hulp0   var byte bank0 system
hulp1   var byte bank0 system
hulp2   var byte bank0 system
whulp   var byte bank0 system
pclhulp var byte bank0 system
sthulp  var byte bank0 system

;---Zeroing registers---
count0   = 0
count1   = 0
count2   = 0
count3   = 0  
count4   = 0
count5   = 0
hulp0    = 0
hulp1    = 0
hulp2    = 0
whulp    = 0
pclhulp  = 0
sthulp   = 0
STATUS.0 = 0

Goto main ;Skip interrupt routine

define INTHAND int

DISABLE DEBUG

asm
;---Save W, STATUS and PCLATH---
int movwf whulp
    swapf STATUS, W
    clrf STATUS
    movwf sthulp
    movf  PCLATH, W
    movwf pclhulp
    
;---Clock program---    
    incf count0, F
    movwf count0
    call check
    movf count0, W
    btfss STATUS,0
    goto eindafwerking
    incf count1, F
    movwf count1
    call check
    movf count1, W
    btfss STATUS,0
    goto eindafwerking
    incf count2, F
    movwf count2
    call check
    movf count2, W
    btfss STATUS,0
    goto eindafwerking
    incf count3, F
    movwf count3
    call check
    movf count3, W
    btfss STATUS,0
    goto eindafwerking
    incf count4, F
    movwf count4
    call check
    movf count4, W
    btfss STATUS,0
    goto eindafwerking
    incf count5, F
    movwf count5
    call check
    movf count5, W
    btfss STATUS,0
    goto eindafwerking

;---Restore W, STATUS and PCLATH---
eindafwerking movf pclhulp, W
              movwf PCLATH
              swapf sthulp, W
              movwf STATUS
              swapf whulp, F
              swapf whulp, W
              bcf intcon,2
              retfie

;---Check function for counts to be 99h maximum (NOT USED YET)---
check return
ENDASM

ENABLE DEBUG

main:
   INTCON = %10100000                  ;GIE enabled, T0IE enabled
   OPTION_REG = %00000111           
   goto loop
   
loop:   goto loop                           ;Wait here for interrupt

The program before (with the LED) was to time it on 1 millisecond, the final program (which isn't this one ofcourse ) is for measurement purposes.

Test step 2:
What I try to do here is to make a counter, that increments count0 when the timer overflows, then when count0 is full, it increments count1 etc etc. Atleast... it should do that....

The things i tried to make it work:
- Reset the C flag of STATUS, only this made only count0 to run.
- Switched , W with , F and vice versa (example: STATUS, W becomes STATUS, F)

A colleague told me to make some own save location (pclhulp, whulp and sthulp). I'm not sure if this is okay...

If someone could help me out again, I will be very gratefull (again!!).

Cheers,

William

(Excuse me for the dutch labeling, it shouldn't be be much of a problem i guess )

/EDIT:

Allrightey I fixed the problem myself! Yay ^^!

define loader_used 1  
define osc 20 

;---Defining Variables---
wsave var   byte $70 system
ssave var   byte bank0 system
psave var   byte bank0 system       

count0  var byte bank0 system
count1  var byte bank0 system
count2  var byte bank0 system
count3  var byte bank0 system  
count4  var byte bank0 system
count5  var byte bank0 system
hulp0   var byte bank0 system
hulp1   var byte bank0 system
hulp2   var byte bank0 system
whulp   var byte bank0 system
pclhulp var byte bank0 system
sthulp  var byte bank0 system

;---Zeroing registers---
count0   = 0
count1   = 0
count2   = 0
count3   = 0  
count4   = 0
count5   = 0
hulp0    = 0
hulp1    = 0
hulp2    = 0
whulp    = 0
pclhulp  = 0
sthulp   = 0
STATUS.2 = 0

Goto main ;Skip interrupt routine

define INTHAND int

DISABLE DEBUG

asm
;---Save W, STATUS and PCLATH---
int movwf whulp
    swapf STATUS, W
    clrf STATUS
    movwf sthulp
    movf  PCLATH, W
    movwf pclhulp
    
;---Clock program---    
    incf count0, F
    movf count0, W
    call check
    movwf count0
    btfss STATUS,2
    goto eindafwerking
    bcf STATUS,2
    incf count1, F
    movf count1, W
    call check
    movwf count1
    btfss STATUS,2
    goto eindafwerking
    bcf STATUS,2
    incf count2, F
    movf count2, W
    call check
    movwf count2
    btfss STATUS,2
    goto eindafwerking
    bcf STATUS,2
    incf count3, F
    movf count3, W
    call check
    movwf count3
    btfss STATUS,2
    goto eindafwerking
    bcf STATUS,2
    incf count4, F
    movf count4, W
    call check
    movwf count4
    btfss STATUS,2
    goto eindafwerking
    bcf STATUS,2
    incf count5, F
    movf count5, W
    call check
    movwf count5
    bcf STATUS,2
    goto eindafwerking


;---Restore W, STATUS and PCLATH---
eindafwerking movf pclhulp, W
              movwf PCLATH
              swapf sthulp, W
              movwf STATUS
              swapf whulp, F
              swapf whulp, W
              bcf intcon,2
              retfie

;---Check function for counts to be 99h maximum (NOT USED YET)---
check return
ENDASM

ENABLE DEBUG

main:
   INTCON = %10100000                  ;GIE enabled, T0IE enabled
   OPTION_REG = %00000111           
   goto loop
   
loop:   goto loop                           ;Wait here for interrupt

What I did wrong:
- I switched the movf and the movwf instructions!
- Checked the wrong bit, it checked the carry flag (Status.0) instead of the Zero flag (Status.2)

I feel so noobish >)