Serout2


Closed Thread
Results 1 to 3 of 3

Thread: Serout2

  1. #1
    Join Date
    Nov 2005
    Location
    Tehran, Iran
    Posts
    28

    Default Serout2

    hi,

    in page 141 of the PBP Manual , (you can download from here: http://melabs.com/downloads/pbpm304.pdf) ,and in SEROUT2 command, it says:
    "Bit 15 selects whether the data pin is always driven (bit 15 = 0), or is
    open in one of the states (bit 15 = 1). The open mode can be used to
    chain several devices together on the same serial bus."

    can anyone explain more about this paragraph. (open and driven?)

    with best regards.

  2. #2
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924


    Did you find this post helpful? Yes | No

    Default

    See if this helps

    http://www.picbasic.co.uk/forum/show...en+serial+port

    Let us know if this helps.
    Dave
    Always wear safety glasses while programming.

  3. #3
    Join Date
    Nov 2005
    Location
    Tehran, Iran
    Posts
    28


    Did you find this post helpful? Yes | No

    Default

    hello mackrackit,

    thanks for your help. it helps me.

    with best regards, Mostafa, Iran

Similar Threads

  1. Serout and 18F87J50
    By Glenn_Webber in forum Serial
    Replies: 8
    Last Post: - 20th November 2009, 15:26
  2. Serout to serial servo
    By azmax100 in forum mel PIC BASIC Pro
    Replies: 20
    Last Post: - 12th August 2009, 17:46
  3. SLOW Serin2 and Serout2
    By dragons_fire in forum General
    Replies: 3
    Last Post: - 26th June 2009, 03:38
  4. Gps with 16f628
    By dragons_fire in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 8th June 2006, 04:38
  5. TMR1 interrupt question
    By ronjodu in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 15th February 2006, 04:02

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts