Free Project - 245 LED Display

[yupng]

Don't ask for much do ya...

What is your skill set?

Which PIC do you want to use?

What sort of hardware would you like to use?

What kind of wireless transmission protocol are you planning on using?

Lost yet?

Try eBay...

What i want is use two microcontroller(MCU) to build this project. One MCU is connect to PC keyboard and transmitter(using RF or IR to transmit the data).Another MCU connect to receiver(can be IR or RF circuit) and dot matrix. I found one similar project but i cant found the datesheet for the MCU used in this project. I also don't understand the code.

[skimask]

What i want is use two microcontroller(MCU) to build this project. One MCU is connect to PC keyboard and transmitter(using RF or IR to transmit the data).Another MCU connect to receiver(can be IR or RF circuit) and dot matrix. I found one similar project but i cant found the datesheet for the MCU used in this project. I also don't understand the code.

And didn't answer ANY of the previous questions...

[yupng]

And didn't answer ANY of the previous questions...

i still doing the research for this project. So i not confirm what hardware are require for this project. I hope anyone has this similar project can post it to me. Actually my project topic is <Wireless Announcement Board>.
Any information that related to this project also can post to me.
Thanks.......

[skimask]

i still doing the research for this project. So i not confirm what hardware are require for this project. I hope anyone has this similar project can post it to me. Actually my project topic is <Wireless Announcement Board>.
Any information that related to this project also can post to me.
Thanks.......

I'd doubt anybody can help you until you help yourself.

Until then, sounds like you might want to use something prebuilt:
http://www.sparkfun.com/commerce/pro...roducts_id=760

[yupng]

I'd doubt anybody can help you until you help yourself.

Until then, sounds like you might want to use something prebuilt:
http://www.sparkfun.com/commerce/pro...roducts_id=760

I had done this project before but not with wireless. I use RS232 port sent the data from pc to dot-matrix display module. Now, i need to improve it to be wireless.
The problem is :
How i send out the data via wireless.
How to translate the receive data and display it on dot-matrix display module.

Anyway........thanks for your reply.
Thanks.......

[mackrackit]

You can use radio modules like these(take your pick)
http://www.rentron.com/PicBasic/RemoteControl.htm
to send serial data.

[yupng]

Anyone can help me do a "wireless announcement board" using dot-matrix.
The data(text) is send out from keyboard via wireless to dot-matrix display.