Free Project - 245 LED Display

[nomad]

WOW! I registered just to post on this thread. (i was going to anyways) i just had to comment, you people have more patience than i. and better observation skills. i wouldnt have noticed the effort magu put into his board as luciano did. i've been reading posts for months now and finally had to say thanks! i've learned so much from luciano, melanie and many others. thanks T. Jackson for this thread and more learning opportunities.

[selim]

Thank you T.Jackson excell work

can you share the source of the VB soft

Thank you in advance

[skimask]

Thank you T.Jackson excell work
can you share the source of the VB soft
Thank you in advance

And again, try reading the thread first...

[iulisan]

Hello.I build the project as indicated by : T.Jackson , Luciano and Magu etc.I did all the tests indicated in the previos threads and I think it will work with just a litlle help that I will ask from anyone...The problem is : when I start it all the LEDs flash with no sense , when I put the board in program mode the led stays on after it blinks for three or four times but the software tells me that the port is not found or is it in use but it isn't so.I belive that if I solve that problem I will finish the board.I dit test the software on win 98 and xp.Mayby if i can find an image of an 24lc256 that works i can burn on my eeprom and see what happens.Thanks a million times.

[iulisan]

There is no one willing to help me ? Is there no one there who has build the display ?!?

[skimask]

There is no one willing to help me ? Is there no one there who has build the display ?!?

A little bit greedy aren't ya? It's only been six hours.

If you read the thread (yes all one million posts), you'll see that while the initial posting of the project had an error or two, all issues were successively solved.
There's even step-by-step troubleshooting in there somewhere.

[Pic_User]

Hi iulisan,
Welcome to the ME Labs PicBASIC Pro forums.

Search the forum for:
245 LED magu


I have not built the project but looking for more information may help you.
-Adam-

[iulisan]

Thanks.
Like I said in my previous posts : I think my board is ok cause it's made after magu(zamfirelu http://www.zamfirelu.org/dtpt/viewtopic.php?t=254) schematics , and a read over and over again the whole thread...the problem is that I can't connect with the computer to the board and today i saw that even when the eeprom in not present on board , the LED for programing blinks the same like with the eeprom on it.
Again thanks a million.
P.S. : I contacted magu on his forum and i stand in touch with him last year , when i first begun to build the display , but until now he did not respond to my new posts , so that is why I decided to post in this forum that started all...
P.P.S. : I'm impatient to continue the project because in this period I have time to do so.

[octobpra]

Hi Magu

Help me i can't find www.zamfirelu.com that u post pdf file in 245 Led Matrix Display (as constructed by Magu) ....