Free Project - 245 LED Display

[bill12780]

I just spent the last...oh....hour or so reading this "Train Wreck" of a thread.
(and the associated like to the scene of the crime)

All I gots to say is this:

Some of you involved in this thread are quite possibly the most kind and generous people I have EVER came across in my entire life. You should all get an extra brick for your hourse in heven...Really. (I wish I could say that I would have acted the same....Gives me something to think about.)

Some of you (And you know who you are) Should be so ashamed of yourself Its hard to imagine you had the guts to even come back and say "I am gone". Its no wonder why you would want your post removed. If I had STOLEN someones hard work and took advantage of their good nature I would feel the same way.

I know that this thread is basically dead. No post for about a month. I also know that my contribution here is "basically" (pun intended) useless. But I just wanted to voice my support for the many and my total disdain for the few.

And I think a special Kudos should goto TJ for making the attempt!

And a big thanks to Melanie for using her super powers to make sure these threads are documented fair and correctly. Its damn nice to know someone like her has your back. We should all send you a pound of good coffee beans! (keep those super powers going!)

Best to all...Who deserve it.

Bill12780

[nomad]

WOW! I registered just to post on this thread. (i was going to anyways) i just had to comment, you people have more patience than i. and better observation skills. i wouldnt have noticed the effort magu put into his board as luciano did. i've been reading posts for months now and finally had to say thanks! i've learned so much from luciano, melanie and many others. thanks T. Jackson for this thread and more learning opportunities.

[selim]

Thank you T.Jackson excell work

can you share the source of the VB soft

Thank you in advance

[skimask]

Thank you T.Jackson excell work
can you share the source of the VB soft
Thank you in advance

And again, try reading the thread first...

[iulisan]

Hello.I build the project as indicated by : T.Jackson , Luciano and Magu etc.I did all the tests indicated in the previos threads and I think it will work with just a litlle help that I will ask from anyone...The problem is : when I start it all the LEDs flash with no sense , when I put the board in program mode the led stays on after it blinks for three or four times but the software tells me that the port is not found or is it in use but it isn't so.I belive that if I solve that problem I will finish the board.I dit test the software on win 98 and xp.Mayby if i can find an image of an 24lc256 that works i can burn on my eeprom and see what happens.Thanks a million times.

[iulisan]

There is no one willing to help me ? Is there no one there who has build the display ?!?

[skimask]

There is no one willing to help me ? Is there no one there who has build the display ?!?

A little bit greedy aren't ya? It's only been six hours.

If you read the thread (yes all one million posts), you'll see that while the initial posting of the project had an error or two, all issues were successively solved.
There's even step-by-step troubleshooting in there somewhere.

[Pic_User]

Hi iulisan,
Welcome to the ME Labs PicBASIC Pro forums.

Search the forum for:
245 LED magu


I have not built the project but looking for more information may help you.
-Adam-