SOUND command and variable array

[Acetronics2]

Tried Brackets Here also ???

Vsnd.0 = 121
Vsnd.1 = 120
Vsnd.2 = 119
Vsnd.3 = 116


Vsnd.0 is bit 0 of Byte Vsnd ( which is also different from Vsnd[A] !!! ) ... can't work properly here !!!

Alain

[flotulopex]

Acetronics,

I'm not sure to understand your remark.

I tried this:
SOUND Speaker,[Vsnd(A),10]
and
SOUND Speaker,[Vsnd.0(A),10]
and
SOUND Speaker,(Vsnd[A],10)
and
SOUND Speaker,(Vsnd.0[A],10)

In fact, I get a sound but it is a much lower frequency than compared to when I play the sound like SOUND Speaker,[121,10].

[Acetronics2]

Tried THIS ???
...

Vsnd var byte [4]

Vsnd[0] = 121
Vsnd[1] = 120
Vsnd[2] = 119
Vsnd[3] = 116

FOR A = 0 to 3
SOUND Speaker,[Vsnd[A],10]
NEXT A

...

Alain

[skimask]

Acetronics,

I'm not sure to understand your remark.

I tried this:
SOUND Speaker,[Vsnd(A),10]
and
SOUND Speaker,[Vsnd.0(A),10]
and
SOUND Speaker,(Vsnd[A],10)
and
SOUND Speaker,(Vsnd.0[A],10)

In fact, I get a sound but it is a much lower frequency than compared to when I play the sound like SOUND Speaker,[121,10].

Do you have a cap on the output like the manual suggests? What kind of speaker are you driving? What's you OSC? Which PIC are you using?

speaker var portb.1:a var byte:for a=0 to 255:sound speaker,[a,50]:next a

or maybe:

vsnd var byte[3]:vsnd[0]=10:vsnd[1]=30:vsnd[2]=75:vsnd[3]=120
a var byte:for a=0 to 3:sound speaker,[vsnd[a],50]:next a

[flotulopex]

Thank you ACETRONICS,

You gave me the correct syntax.

Just to make sure, I tried this that works too:

Vsnd var byte [4]
Vsnd(0) = 121
Vsnd(1) = 120
Vsnd(2) = 119
Vsnd(3) = 116

FOR A = 0 to 3
SOUND Speaker,[Vsnd(A),10]
NEXT A

I personally would have appreciate to see this kind of example in the Compiler's manual instead of bothering you... I read it a few times, but without any clear example, it stayed unclear to me.

Thanks a lot for your help.

[Acetronics2]

Hi, Flotul

Just remember the same things must have EXACTLY the same name ...

I do not know if brackets and parenthesis (?) really work the same manner ... but manual says "Brackets" !!! ... so let's write Brackets !!!

no bad surprises involved ...

Alain

[flotulopex]

Thank you for pointing this out.

Manual shows "brackets" and this is maybe why I wanted to try with parenthesis too

Again, there is almost anything needed in the manual - same as in the data-sheets.

Unfortunately, it is not always comprehensible for beginners like me.