Nordic nRF24L01

[mister_e]

never worked with them, i use Maxstream Xbee pro instead. Seems an interesting one so far. Maybe we could deal something together.

Send me an e-mail if you're interested

[HenrikOlsson]

Hi,
There's som example code available here:
http://www.sparkfun.com/commerce/pro...roducts_id=691
Unfortunatly it's in C but it may help.

/Henrik Olsson.

[Ron Marcus]

Hi,
There's som example code available here:
http://www.sparkfun.com/commerce/pro...roducts_id=691
Unfortunatly it's in C but it may help.

/Henrik Olsson.

Thanks. I've looked it over, but C is still a little understood language for me. There are some assembly routines that actually make more sense to me on the same site.
Since I spent almost a week translating Chipcon control codes to PBP, I didn't want to repeat the exercise.

Ron

[whatdoido_4]

Ron,

Did you have any luck with the NRF24L01? Could you post or PM me some code?

Keith

[Balachandar]

Hi Ron,

Check out this site.

http://www.diyembedded.com/

It contains many descriptive tutorials on nRF24L01 that should make it easier for you to write the code.

Regards,
Bala

[Ioannis]

never worked with them, i use Maxstream Xbee pro instead. Seems an interesting one so far. Maybe we could deal something together.

Send me an e-mail if you're interested

Hi Steve. Have you had success with the Xbee Pro devices?

Did you test the range? I am interested in using them in a elevator for cars and would like to have a range of 4 floors from within the metal elevator cage.

Ioannis

[vancalst]

For those who are interested in picbasic code for the nRF24L01 chip from Nordic, go to my google site:

http://sites.google.com/site/avcnetsite/mcu

regards

avc