Convert an integer to a string

[HenrikOlsson]

Hi,
How about:

Serout......[#var_name]
LCDOUT $FE,1,[#var_name]

/Henrik Olsson.

[GioppY]

Perhaps i badly explained.
I do not use serout or lcdout; i need a 16 bit binary to decimal conversion; i have to send a variable value to the Nokia 3310 display.
I now realized that DIG may be useful.
Regards

[Jerson]

Hmm.. you are looking for an equivalent like the c function sprintf.

You are right, the DIG command is ideal to build the string. It may be more optimised if you hand code in asm

Jerson

[skimask]

Perhaps i badly explained.
I do not use serout or lcdout; i need a 16 bit binary to decimal conversion; i have to send a variable value to the Nokia 3310 display.
I now realized that DIG may be useful.
Regards

tenthousands = value / 10000
value = value - ( tenthousands * 10000 )
thousands = value / 1000
value = value - ( thousands * 1000 )
hundreds = value / 100
value = value - ( hundreds * 100 )
tens = value / 10
value = value - ( tens * 10 )
ones = value

string(4) = tenthousands + 48
string(3) = thousands + 48
string(2) = hundreds + 48
string(1) = tens + 48
string(0) = ones + 48

First chunk of code will get the decimal values for the place holder for that digit.

Second chunk of code will change that into an ASCII representation of that number.

Then you can just serout (or SPI or I2C or whatever) that 'string' out whatever port you need to...

Theoretically anyways...