Conversion Problem

[HenrikOlsson]

Hi,
I'm not sure I understand the problem here. It's not a matter of how it's stored. It's a matter of how you display it when you retrieve it from the EEPROM. You say that the value 62 is stored as 3E but 3Ehex IS 62dec.

Sorry If I misunderstood the question.

/Henrik Olsson.

[Pesticida]

Hi,
Thanks for your interest.

I must to write my input 1:1 to my Eeprom Data example:

Hyperterminal Input : 9 5 0 6 6 2

EEprom Data : 95 06 62 ..........

I make a mistake i dont need decimal ,I think I must store this as hex 95,hex 06,hex 62 but idont know how i can convert this

Regard Pesti

[Darrel Taylor]

Hi Pesti,

Try this..

ProjektSum var byte[3]

LoopProjekt:
HSerin 30000,LoopProjekt,[HEX2 ProjektSum(0),HEX2 ProjektSum(1),HEX2 ProjektSum(2)]
 
I2CWrite sda,scl,%10100000,$F0,[ProjektSum(0),ProjektSum(1),ProjektSum(2)]

[Pesticida]

Hi,
Thank You very much! Taylor
:-) one little change and a so great solution.
Super.

Regard Pesti