Hmm. Well, at 4 MHz, that's about 250 microseconds; at 20 MHz, about 50. The oscillator spec gives a nominal startup time of 10 milliseconds. Perhaps I should put an RC circuit on the /MCLR pin.
|
Hmm. Well, at 4 MHz, that's about 250 microseconds; at 20 MHz, about 50. The oscillator spec gives a nominal startup time of 10 milliseconds. Perhaps I should put an RC circuit on the /MCLR pin.
Russ
N0EVC, xWB6ONT, xWN6ONT
"Easy to use" is easy to say.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks