I2CRead & I2CWrite not working as expected

[richard]

yet still another pointless snippet , with nothing defined

I2CREAD DPIN,CPIN,$A0,B0,X

you persist in using incorrect syntax , it should be

I2CREAD DPIN,CPIN,$A0,B0,[X ]



proper code, not snippet with undefined rubbish, its not hard

#CONFIG             __config        _CONFIG1,    _FOSC_INTOSC & _CP_OFF & _WDTE_OFF &  _PWRTE_ON  &  _MCLRE_ON  & _CLKOUTEN_OFF
              __config      _CONFIG2, _PLLEN_ON & _LVP_OFF
#ENDCONFIG
;pic16f1825

DEFINE OSC 32
OSCCON=$70
ANSELA=0
ANSELC=0
trisa.0=0
DEFINE I2C_SLOW 1 
ANSELA = 0
a Var Byte
addr Var word
ar Var Byte


SCL var Porta.2                     
SDA var Porta.1
lata.0=1
DEFINE DEBUG_REG PORTA
DEFINE DEBUG_BIT 0      ;  if not used for pwr  
DEFINE DEBUG_BAUD 9600
DEFINE DEBUG_MODE 0     
pause 2000
Debug 13,10,"Start",13 ,10


a=20
addr=$200
I2cwrite Sda,SCL,$a0 ,addr,[a]
pause 10


addr=$200
I2CREAD Sda,SCL,$a0 ,addr,[ar ]
debug 13,10,sdec ar
end

what a write looks like



what a read looks like