Troubles with SPI

[mister_e]

if it use SPI, you want to use SHIFTOUT. Maybe SHIFTIN... but i doubt it will work as Slave... Hence why you should have a look at some Melabs code example.

SpiMast.bas http://melabs.com/resources/samples/pbp/spimast.bas

SpiSlave http://melabs.com/resources/samples/pbp/spislave.bas

[mombasa]

Thanks for help, but I used Shiftout and Shiftin without problems now. It was only a commands sequence problem. With the appropriate Cypress directive (that I enclose) I solved all. Thanks again.

Mombasa
Lazio
Italy