Big Problem in PBP To receive DMX

[keithdoxey]

I ask again but nobody nows.
this is my 3.th thread in this forum about the receive DMX.

OK, so I am going to ask a question now.

why do you have to ask essentially the same question so many times and in so many threads

Unless you expect someone to hand you a complete PBP program to do exactly what is needed, you will have to do quite a bit of the work yourself.

If you only ever COPY what has been written by others you will learn NOTHING.

This forum contains many threads and examples of using Hserin/Hserout, buffering the data and manipulating the data.

It also contains many examples of PWM to create your dimming which will also be needed in addition to receiving DMX.

As has been pointed out before, there is nothing magical about DMX, it is just very fast serial data but you do need to FULLY understand the capabilities of DMX and how it is intended to work. Again you have been given pointers as to where to find that information.

If you do not have much experience with PBP or with PICs in general then I would suggest that you build a few small projects to familiarise yourself with what can be done before attempting a larger project such as DMX decoding.

Irrespective of how many threads you start, no one is going to hand you the solution on a plate, YOU must undertake the bulk of the work yourself.

I am sure there are some people who would undertake you project for you if you provide them with sufficient reward so maybe that would be another option!