Problem with DT_Ints-14

[BobSpencerr]

amazing isnt it....

The simple question
"Has anyone else had problems comiling with these files included?"
is seen as insulting to some.

While I regeret ever asking it, I must defend the fact that it is a simple question. At not time in this sentence does it state that I thought that the error was inside the "holy grail" of code written into DT_Ints-14 but was simply asking if anyone else had a similar problem.

Perhaps something more than "MPASM Required!" on the home page would be better, like some instructions for the newbies on how to install it and where.

[Archangel]

amazing isnt it....

The simple question


Perhaps something more than "MPASM Required!" on the home page would be better, like some instructions for the newbies on how to install it and where.

If you are using microcode studio, you likely already have MPASM, you enable it by clicking view, then click compile and program options, select the tab that is labled assembler, and put the little check mark in the box marked use MPASM. And when you get it working you too will know the genius of this fine piece of code.
JS

[Darrel Taylor]

At not time in this sentence does it state that I thought that the error was inside the "holy grail" of code written into DT_Ints-14

You might want to take a look at the Title of this thread again.

It's not the "Holy Grail", it's just a really handy program that was 4 years in the making. With 3 complete versions to get where it is now.

And since we're in Defense mode. I said...
Post your code.
Get your answer.
...

But apparently, that wasn't an option.

You don't want to use it? That's fine. People have been using interrupts for years without it. I just tried to make it easier. And alot of other people have apparently seen some of the benefits.

Some of those people have expressed that fact here in this thread. And I appreciate it alot. It's not a "BUN FIGHT" as you've called it in another thread.

I also appreciate the email's I received in response to my "NOT a registered user" status. And you're all correct. I can't "throw the teddy in the corner" (I like that line) over one incident. And yes, I did.

Oh, and ...

Perhaps something more than "MPASM Required!" on the home page would be better, like some instructions for the newbies on how to install it and where.

There is no installation, simply place the files in with your own project. This is a basic rule for everything. Of course, you can always place it anywhere on your hard disk, but then you'll need to use the full path in the INCLUDE statement.

If you look here...
http://www.darreltaylor.com/DT_INTS-14/intro.html
You'll find several examples of how to use it.
I don't know what more I could do.

If you're still interested, I'm happy to help. (as long as I'm not attacked).

Regards,

[BobSpencerr]

Come on Darrel,

lets bury the hatchet.
I asked what I thought to be a harmless question, obviously I was wrong.
You responded in an alrming way that took me by suprise.
I reacted badly.

Once again,
Im sure its great code,
Im sure its a great help
and I am sorry for starting this.
Please remember though, what appears obvious to those with experience may not be so to newcomers.

Anyway. Please, no hard feelings.