Handeling multiple Interrupts

[BobSpencerr]

I realy do appreciate your help here.
As you no doubt know, it can get realy frustrating when things Should work but dont.

Ill try this code tonight

[skimask]

I realy do appreciate your help here.
As you no doubt know, it can get realy frustrating when things Should work but dont.

Ill try this code tonight

Ok, it's this thread.
Hurry up! Get on it! Some readers (me in particular) are dying to know!

[BobSpencerr]

I work in a University.
The programmer is at home.
I am itching to try it too but we will have to be patient now wont we.

[BobSpencerr]

No good dude.
Didnt work either.

I am going to rewrite it all starting with tmr0 interrupt when I can find info on its use.
Then I will impliment the tmr1.

Thanks anyway for the time.

[BobSpencerr]

Yes.........
after 3 hours of looking at the same thing I spotted it.
I miised a line that starts the TMR0.
The option register had to be set and she sprang into life.

Thanks for the help.
Now onto the next step.

[skimask]

Yes.........
after 3 hours of looking at the same thing I spotted it.
I miised a line that starts the TMR0.
The option register had to be set and she sprang into life.

Thanks for the help.
Now onto the next step.

Sweet deal. I was just about to start rewriting things...saved me some time...

[BobSpencerr]

Thanks for the help mate.

Ive started a real bun fight in the other forum about Darrel Taylors software.
I must be more careful about how I word questions in here in future.


Anyway, thanks again for the help. I can deal with all of the interrupts easily now.