Compile using MCS

[Darrel Taylor]

MCS creates the files during the compile process. Then deletes them when it's done.

run.bat
run.pif

The files are created in the same folder as the project being compiled.

I don't know why it wouldn't be able to find them, unless the folder's path is too long or has some non-standard characters in it.

[Angus Anderson]

Thanks guys for the replies -
I'm going to remove and reinstall PBP - I've already reinstalled MCS
Darrel- You know, that could just be it. I renamed project directories just before this happened. I'll change them back & let you guys know what happens

regards

Angus

[Angus Anderson]

A reportback, chaps.

I moved the PBP source files from a folder on the desktop into the MCS directory, and everything compiles fine.

Angus

[malc-c]

If you open MCS and then select VIEW then EDITOR OPTIONS there is an option at the bottom of the settings for the default folder which is normally C:\Program Files\Mecanique\MCS

If you then click on the change button you can select any other location on your PC