Elnec Programmer

[mister_e]

Damn, ok i'll try to find some info in meantime. Good night!
it's 17:11 here... beer and meal time

[Ioannis]

Bon Apetit Steve!

[mister_e]

MERCI beaucoup Ioannis!

[mister_e]

ευχαριστώ πολύ!

[Ioannis]

Hmm, very nice!

Παρακαλώ!

Google is your translator?

Is your programmer Parallel or USB? I 'm thinking of buying the new Smartprog2 with the USB connection. It is annoying. I am sure that the problem in the first place comes from the M/B (an MSI 945P Platinum). But could not have success in using it succesful although Selftest and Selftest plus are succesful.

Ioannis

[mister_e]

Google is your translator?

Nope, i used Etaco. I always cross my finger when i use something like that... you know why!

My Programmer is Parallel. It's a BK Precision 844A, which is the re-labeled of ELNEC SmartProg. I wouldn't hesitate to jump to the USB version and keep the other one on another computer if the problem arise here. 'Till now, everything i have from BK Precision never failed. No coincidence why they're on the market since over 50 Years

Anyways, i did few search here and there and talked with some of my buddy who have the same programmer i have or any ELNEC... nobody have heard/experiment the problem you have... I agree it's annoying.

Sure if i hear something i will let you know.

and... Παρακαλώ as well

[Ioannis]

Thanks Steve. I am sure it is not a problem from the programmer side. 100%.

It is working absolutely fine on other computers. So it is something with the port or the ... connector. I susspect something here.

The translator of ECTACO is realy great, but ... dangerous sometimes. Imagine a typo in ash, typed as ass! And there are many much worse...!

Thanks again,
Ioannis