|
Yes I did it. First thing. So there is no conflict between the two ports. I am concerned about the address of the new port. It is too high. May be that's why PG4U does not see the port...Originally Posted by mister_e
I 'll try to reinstall the sw and see what happens...
Thanks Steve.
|
if the driver don't allow you to move it to the usual LPTx address or use dedicated LPT name (in Port Settings), i don't know what could happen.
Last edited by mister_e; - 21st February 2007 at 21:56.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
It is the SUNIX PCI Express card with 2 RS232 ports and 1 Parallel port. I suppose it is not possible to change the allocation. Obviously from BIOS it is not seen as it is add-on card.
Yikes...
|
in my current PC, i added a Serial card (only 1 COM port) and in the control Panel>> system>>>Hardware >>>> Device manager >>>>> PORTs(COM & LPT) >>>>>>> card name PCI Serial PORT... >>>>>>>>>>>>proprieties >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PORT SETTINGS>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> advanced
i can change the default COM name. But i don't know for your card
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Yes I did change the name from LPT3 (default) to LPT1 as it is requested by PG4Uxx. But it seems this is not enough. I just finished installation of the new 2.35 version and restarted the PC but no joy...
It is 8 past midnight and I am very angry with it...
I 'll leave it for tomorrow...
Thanks for being near, although too far...
Goodnight (or day to you!)
|
Damn, ok i'll try to find some info in meantime. Good night!
it's 17:11 here... beer and meal time
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks