OK OK OK
The 5V relay is about 1.5 inches from the ULN2004.
Darrel, what is the cap-resistor across the relay coil supposed to do?
I have a 10K R pulling MCLR high
I have a 1000uF cap across +5 and GND right at the chip, along with a .1uF there too.
I'm going in today to place diodes across the relay coils to see if that could solve the problem...
I imagine that some kind of back fluxing is the issue... but I don't understand how the spike could travel through the 'unconnected' parts of the relay, and how it could effect my battery powersupply...
Joel
Bookmarks