This one is for Melanie if you have time.

[Ioannis]

Hi Melanie. If it is not too much trouble, a couple of photos of the sandwitch assembly would be helpful.

Thanks,
Ioannis

[b1arrk5]

Dear Melanie,
I would also like to see a few more photos if you can find the time. It looks great! I remember someone suggesting that you could make a one off using a laser printer and laser overhead transparency film. He or she made their layout on the computer, and then mirrored it and printed it out so that the toner would be on the back. Probably would last long enough to demonstrate a prototype.

Thanks,

Jerry.

[Ioannis]

I have tried a different approach.

I printed on plain paper the color/bw artwork (or even on a digital photocopier from a pdf file).

Then laminated the paper and cut it to the dimensions needed.

This works good even if one has switch underneath or LCD (you have to cut carefully the window).

Of course it is not possible to make a dome at the position of the virtual button, but it is a prototype, right?

Ioannis

[muddy0409]

Hi Mel.
I would be pleased to see some pics of the "off the shelf" RJ45 plate you used. I have looked around Australia for cheap ready to go type plates with assorted holes already in them but can't find any.
Are these a standard electric accessory in UK?

[keithdoxey]

Hi Mel.
I would be pleased to see some pics of the "off the shelf" RJ45 plate you used.

http://www.rapidonline.com/productin...moduleno=75336

[Melanie]

OK, gimme a day or two for the pics.... decorators have destroyed my office (new promotion, new budget, new decor!) so the only free seat I've got at the moment is in the executive loo!!!! Just as well the Laptop's wireless, but the acoustics are a bummer for talking to clients...

[b1arrk5]

Hi Melanie,
Congratulations on the promotion! From seeing your work here on the forum I know it was well deserved.

Jerry.