what would likely be better to use for the circuit? condenser or dynamic? can you suggest any easy method of determining the leg configuration of a 3 wire condenser mic? Thanks in advance.
|
what would likely be better to use for the circuit? condenser or dynamic? can you suggest any easy method of determining the leg configuration of a 3 wire condenser mic? Thanks in advance.
|
any model for this mic? is this a professionnal XLR connector or just a 3 wire capsule?
Any picture or part # would be handy.
Condenser or dynamic? Who knows, the best way will be to evaluate them with a pink noise and a spectrum analyser.
Few days ago i found the following freeware for someone here. I've tried it, and i'm really impressed how good it is... for a freeware.
http://www.sillanumsoft.com/
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
It's just a simple 3 wire capsule.
I am feeding the mic into an amplifier which will turn the signal into pulses. I want to measure the pulse width and compare the widths of the two mic inputs. The problem is I do not know what commands to use in the PBP program. I've read the manual and PULSIN seems to be a good command. I reallt need some hints on this. Thanks again very much for helping me even until this far.
|
You could use Count as well. To me using the internal Timer/Counter have it's advantages.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks