Quote Originally Posted by mister_e View Post
Few post before you said you didn't use the RF for now.. is this still true?

If you receive always different things, it sounds like a baudrate problem to me... dpending your config fuses settings, hardware it may ruine your whole life..

try a simple serial comm before adding the USB.
Its true, I tested the TX/RX using a wire initially and there were absolutely no problems with the baudrate or noise etc

Now that I have attached the RF modules I get errors..its probably because this module uses ASK

Ideally the module should not require CRC bits, what I mean is if you send a '1' you should get a '1'

Im trying another data link from here:
www.cappels.org/dproj/LCRFLINK/LCRFLINK.htm

i'll try it and let you guys know...