Serious Serial Situation Setbacks...

[Dansdog]

I am using ceramic resonators. But I do have x-tal's and will switch them out. Out of curiosity why does it matter? I chose the ceramic's because they consume less space.

Fuses... That's something I've never heard or read about before (in PIC language).

I'm using MicroCode Studio 2,2,1,1 and PBP version 2.46.

When I select to "Compile and Program" the "meProg" initiates and I can select to view the configuration window. Do I have to do anything other than select the correct oscillator?

[skimask]

I am using ceramic resonators. But I do have x-tal's and will switch them out. Out of curiosity why does it matter? I chose the ceramic's because they consume less space.

Fuses... That's something I've never heard or read about before (in PIC language).

I'm using MicroCode Studio 2,2,1,1 and PBP version 2.46.

When I select to "Compile and Program" the "meProg" initiates and I can select to view the configuration window. Do I have to do anything other than select the correct oscillator?

Xtal vs resonator - xtal=tight tolerances, resonator=not quite so tight; required if you're using any kind of communications

fuses - see the PBP manual, page 8.

[Dansdog]

Thanks skimask!!!

Page 8 might become next favorite page....I'll let you know tomarrow.

Dan