Pic reseting when switching mains current with relay

Results 1 to 23 of 23

Threaded View

  1. - 3rd February 2007, 15:23 #7
    mister_e's Avatar
    mister_e
    mister_e is offline Contributor
    Join Date
    Sep 2004
    Location
    montreal, canada
    Posts
    6,898

    Did you find this post helpful? Yes | No

    Default

    If you didn't change the default config fuse while loading the Bootloader firmware the first time, you can't modify them later in your code.

    Default for 16F876_04.HEX are HS OSC,Watchdog off, Power up ON, Brown out ON, LVP OFF.

    Maybe you could also try to reload the bootloader firmware but set the BrownOut to OFF... but, i think there's much more to check before...
    Last edited by mister_e; - 3rd February 2007 at 15:27.
    Steve

    It's not a bug, it's a random feature.
    There's no problem, only learning opportunities.
« Previous Thread | Next Thread »

Similar Threads

  1. Reducing PIC current to as low as possible...
    By FromTheCockpit in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 18th November 2009, 05:28
  2. Transistor Selection for Switching Relay Coil-with a little bit of info on my "ARSC"
    By rxforspeed in forum Schematics
    Replies: 24
    Last Post: - 7th November 2008, 05:41
  3. Serial Relays
    By tazntex in forum General
    Replies: 3
    Last Post: - 17th May 2007, 18:42
  4. Detecting mains current
    By lsteele in forum Schematics
    Replies: 3
    Last Post: - 13th January 2007, 15:48
  5. High current switching output
    By Tissy in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 8th September 2005, 15:06

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules