Hi Sougata,
The printer has an Hex Dump mode. This mode will show you
exactly what codes the printer is receiving.
(The printer will print each byte in HEX on paper).
See the printer manual how to enable the HEX dump.
* * *
To see if the selected emulation is a problem, boot
the PC with DOS 6.22 and type:
Copy myfile.txt > PRN
(Put first 2 or 3 lines of text in the file myfile.txt).
If you see the text of myfile.txt printed on paper you are fine.
(The printer must be connected to LPT1 in order to use PRN).
* * *
I was unable to downlaod a manual from the web site.
http://www.tvs-e.in
Try to phone them. (India).
Contact:
http://www.tvs-e.com/may12-05_contact.asp
MSP 245 brochure:
http://www.tvs-e.com/may12-05_downlo.../MSP%20245.pdf
Note that you can install an optional serial port in this printer.
Best regards,
Luciano
Bookmarks