USB bluetooth interface to PIC

[Darrel Taylor]

More info for you ... from Lester

http://www.picbasic.co.uk/forum/showthread.php?p=16960

- and -

http://www.quickblue.co.uk/

.

[lester]

Hello, the link to the source code example and schematic is http://www.quickblue.co.uk/source-code.html

At present we have no plans to port this funtionality to PBP.

HOWEVER, i'd be very happy if a , suitably qualified, PBP user would like to do the port, it would give PBP users a very low cost solution.

To that end i'm happy to provide a ready built QuickBlue Module FREE (PIC Micro Onboard, DIL package that can be programmed with PBP).

So, if someone is up for the challenge, i'll provide the hardware, the source code and data sheets etc are already on the QuickBlue web site.

More than one person can collaborate, via this forum, the source code is open source, so i'd be pleased for you to publish the resulting code for all PBP users to use.

[naidab]

Its my pleasure to try it, It woud be great exploring it on PBP May I ask how to have the help?

[skimask]

Its my pleasure to try it, It woud be great exploring it on PBP May I ask how to have the help?

What help? I didn't see any help...

[mister_e]

HOWEVER, i'd be very happy if a , suitably qualified, PBP user would like to do the port, it would give PBP users a very low cost solution.

Lester, i don't know if i'm a qualified PBP user, but i accept the challenge. Looking at the source code, it should be a real piece of cake to do.

You know how and where to reach me. I'm waiting for your e-mail.

[lester]

Hello, before i go donating hardware - even if its not considered helpful by some - can we agree that :

Someone on this forum takes responsibility for the project (mister_e???)

The resulting source code and examples are posted on this forum and copied to me so that i can post them in a file download area to be created at www.compile-it.com

The project discussion is confined to a new thread created by the project owner, If required i will create a new forum area to support this project and other collaborations in the future.

Crownhill Associates Limited are NOT responsible for this project, the porting to PBP or the resulting code examples.

If the donation of hardware by Crownhill is not considered helpful to members of this forum and users of PBP, inform me via this thread and i'll ensure that no further unhelpful offers of hardware or services are forthcoming.

[mister_e]

Sounds good to me.

On my side, i don't have any release date for it so don't ask me daily if i received the parts, if i did it or not, if i made some progress or not. Once done and tested, everybody will know.

If some feel that this product could be use in their project one day, i will take responsibility of the code example... not the hardware or else potential damage.

If everybody interested agree, life is good, unless, we could just forget it.

It's still a free offer from Crownhill and me after all

[lester]

I think that it would ahve been nice to see some more support for this project, before anyone undertakes hours of porting.

Does anybody want to see this happen?

[sayzer]

Lets vote for it!

Count me first : YES
Counter = 1