even @ 2400 baud, some PIC may don't work. Unless you want to waste your time to fine tune the internal osc (don't remind if you can do it with those 629 or 675), you should think of using a external crystal or a ceramic resonator.
|
even @ 2400 baud, some PIC may don't work. Unless you want to waste your time to fine tune the internal osc (don't remind if you can do it with those 629 or 675), you should think of using a external crystal or a ceramic resonator.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Well so far so good ( at least sending to the device) with just the little 12F675. I put the bit/byte patterns into eeprom and read them into bitstream output for each requested command to the device.
I built a control switch pad this weekend using A/D on one pin.
My next step is to include an encoded POT output device to control a second piece of equipment at the same time. I have two pins left..... oh boy !!
These chips is fun!!
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks