In-Circuit Debugger Mode

[Darrel Taylor]

Thanks Luciano,

More good info.

I don't use PIC microcontrollers, I did not test the above.

What!

You've been around here for years. Made 436 posts so far. Everyone loves your great links. And you don't even use PIC's?

I'm Dumbfounded.

_

[Luciano]

Hi Darrel,

More links for you.

BehrendBug home page:
http://www.personal.psu.edu/~smj161/...htm#BehrendBug

BehrendBug demo video (WMV format)
http://www.personal.psu.edu/~smj161/...dBug_movie.wmv

* * *

I was able to find these links with Google.
Searched string: "ICD2" INBUG
(Where "INBUG" is the bit7 of the ICKBUG register).

With the first link below I was able to find
the BehrendBug home page, which is the first link in this post.

http://www.personal.psu.edu/~smj161/...umentation.pdf
http://www.personal.psu.edu/students...BehrendBug.doc

Note that the second link (doc file) has a different path
on the server. (Maybe more or different info to dig out).
Note also that the DOC is not the same as the PDF.

The BehrendBug uses the serial port. If I find more information
about in-circuit debugging via ICSP interface pins / ICSP protocol,
I will post it here. (See the link below).

* * * *

PIC16F877 DOS:
http://www.beyondlogic.org/pic/f877-6bk.pdf


Best regards,

Luciano