Dimmer Circuit

[Pesticida]

Hi,

Yes I send trough RS485 data to my Pic,for channel one and channel two.

But when I receive the delay data for the first Channel for example 30*100=3000 us and 40 *100 =4000 us for the second Channel,then I think that this can not work while the first channel must wait 3000 us + 4000 us and then go low.

Did you understand what I mean,wehn I modify the data for Channel one then i go modify the data for the Channel two too.

regard
Pesti

[Pesticida]

Ok Im A Idiot :-),Ifind the way I must just for every Channel put a New Zero Cross Detection like here:

POS_FLNK:IF ZeroDetect = 0 Then POS_FLNK
NEG_FLNK:IF ZeroDetect = 1 Then NEG_FLNK
PauseUs Delay_1
high PortC.0
pauseUs 100
low PortC.0
POS2_FLNK:IF ZeroDetect = 0 Then POS2_FLNK
NEG2_FLNK:IF ZeroDetect = 1 Then NEG2_FLNK
PauseUs Delay_2
high PortC.1
pauseUs 100
low PortC.1
hserin 1,MainStart,[WAIT("!"),DataIn[0],DataIn[1]]
Delay_1 = Datain[0] * 100
Delay_2 = Datain[1] * 100
GoTo MainStart

Regard Pesti

[Pesticida]

Hallo,

My Code is Working ,but :-) I dont have the full Brightness on all the light bulbs.

Did some one know what I can change in my Code,
I use now a 20 Mhz Osc.

Thanks.

Regard
Pesti