ESC problem plz help

Closed Thread
Results 1 to 12 of 12

Hybrid View

  1. - 20th January 2007, 17:19 #1
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Default

    Hi Al

    Mine ...( The second !!! ) works fine and is simple to realize ...

    but all "555 " designs are to be used without fear !!!

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  2. - 20th January 2007, 18:14 #2
    al000y's Avatar
    al000y
    al000y is offline Junior Member
    Join Date
    Jan 2007
    Posts
    7

    Did you find this post helpful? Yes | No

    Default

    hey
    Acetronics i know you get bored from me but i swear its the last question



    after i build the servo pulser
    i should conect the red wire one the ESC to the + wire one the servo pulser
    and the brown to - and the orange to the signal and it(the motor) will work without a receiver right?
    Last edited by al000y; - 20th January 2007 at 19:42.
  3. - 20th January 2007, 19:56 #3
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Wink

    Quote Originally Posted by al000y View Post
    hey
    Acetronics i know you get bored from me but i swear its the last question

    > do not think you can do it so quickly !!! being boring only comes from stupid questions ... not from lack of knowlege !!!



    after i build the servo pulser
    i should conect the red wire one the ESC to the + wire one the servo pulser
    and the brown to - and the orange to the signal and it(the motor) will work without a receiver right?
    Seems right ... which brand is your ESC ???... just to be sure !!!

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  4. - 20th January 2007, 20:43 #4
    al000y's Avatar
    al000y
    al000y is offline Junior Member
    Join Date
    Jan 2007
    Posts
    7

    Did you find this post helpful? Yes | No

    Default

    this one
    http://www2.towerhobbies.com/cgi-bin...&I=LXKSY4&P=ML
  5. - 21st January 2007, 10:21 #5
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Smile

    Hi,

    Ok, With Universal connector !!!

    Check the red Led dims with the stick position ( low glow = 1 ms signal side High glow = 2ms signal side ) and you can connect ...

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Similar Threads

  1. sleep problem help plz >>>.
    By Mus.me in forum mel PIC BASIC Pro
    Replies: 20
    Last Post: - 16th November 2009, 08:21
  2. Problem with ports help plz
    By Mus.me in forum mel PIC BASIC Pro
    Replies: 33
    Last Post: - 2nd August 2009, 21:51
  3. USART Problem , but don't know where, in pc? or in PIC?
    By precision in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 15th July 2007, 08:12
  4. 1 slave 1 master 1 MAX232 1 problem ?
    By SuB-ZeRo in forum mel PIC BASIC Pro
    Replies: 19
    Last Post: - 31st July 2005, 22:59
  5. Problem with intensity.. plz help
    By Srigopal007 in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 7th October 2004, 17:25

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules