|
1) - How do you propose to controm the brushless motor if not via RC transmitter / receiver. The simple way would be to use a PIC or NE555 to generate the 1 - 2 ms PPM signal that the ESC is expecting.
2) - What are you trying to do with the motor.
However you will need to design or research the project fully, and come up with your own code or schematic. You shouldn't expect the guys here to develop the project for you
|
Hi,
There was exactly the same thread here, some weeks ago :
http://www.rcgroups.com/diy-electronics-199/
exactly here :
http://www.rcgroups.com/forums/showthread.php?t=617999
so, with a little SEARCH ... you'll have your answer !!!
Alain
Last edited by Acetronics2; - 20th January 2007 at 16:00.
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks