Switch / Potentiometer

[bearpawz]

Hi all,

Im pulling (whats left) of my hiar out trying to find a part. Basicly I need a low profile Pot with built in spst momentary switch... anyone know of a part number and source? thanks

[Acetronics2]

Wow ...

Never heard of that !!! ... in 40 Years of electronics ...

your switch might be activated at a moment, but which ... Could you explain further what you want to do ???

Alain

[Luciano]

Hi,

See these links.

Best regards,

Luciano



http://www.alpsusa.com/


Single-shaft momentary push (0.5mm-travel) switch
RK117111400C:
http://www3.alps.co.jp/WebObjects/ca...117111400C.pdf

RK1171114D01:
http://www3.alps.co.jp/WebObjects/ca...1171114D01.pdf

* * *

Single-shaft momentary push (1.5mm-travel) switch
RK1171114V02:
http://www3.alps.co.jp/WebObjects/ca...1171114V02.pdf

----

[bearpawz]

Its for a "Knight Rider" project.. .specificaly the "Surveilance Mode" box. Basicly there is one switch... you push it in and it turns unit on or off. You rotate it and it will move the LED's in responce to the movement. I might just say heck with that function and just go with a push on push off. I think the other function was only used in one episode if that. The rest of the time it just sat there ramping the bargraph up and down. It would be nice if I could find it... lord knows It took an act of congress to get the duplicate bargraph display... But I got an exact replacement part... Im probably better off focusing on developing the rest of the dash for now.

[Archangel]

Its for a "Knight Rider" project.. .specificaly the "Surveilance Mode" box. Basicly there is one switch... you push it in and it turns unit on or off. You rotate it and it will move the LED's in responce to the movement. I might just say heck with that function and just go with a push on push off. I think the other function was only used in one episode if that. The rest of the time it just sat there ramping the bargraph up and down. It would be nice if I could find it... lord knows It took an act of congress to get the duplicate bargraph display... But I got an exact replacement part... Im probably better off focusing on developing the rest of the dash for now.

Knightrider?
Wasn't that on television just before dirt was invented? I really doubt they used PICs to do that, I would bet they used an Lm3914 bargraph display driver and just ramped up the voltage to light the procession of LEDs.

[keithdoxey]

Knightrider?
Wasn't that on television just before dirt was invented?

Thanks a lot Joe !!!!!

Do you realise how old that statement makes me feel ?

I was in my twenties when Knight rider was on first TV. As if making me feel old isnt bad enough, I have that bloody theme tune running through my head now