Problem with led

[skimask]

No.
I try now with toggle and work.
Thank you.
I add this:
if new = 1 then toggle led1
if new = 2 then toggle led2
The only problem now is :
when power up for the first time , i must press the number 2 > enter and again the number 2 > enter to turn the led on (only for number 2 - not for number 1)
After this no need second time to press the number 2.

Have you no imagination? No creative thoughts?

CMCON = 7
ANSEL = 0
adcon.1 = 7

new var byte
led1 var PORTA.2
led2 var PORTA.3

main:
new = 0
serout porta.0, T9600, ["Enter which LED to light (1-2,0=Off): ", 10, 13]
serin porta.1, T9600, new
serout porta.0, T9600, ["LED Chosen: ", new, 10, 13]

if new = "1" then

if led1 = 1 then
led1 = 0
else
led1 = 1
endif

endif

if new = "2" then

if led2 = 1 then
led2 = 0
else
led2 = 1
endif

endif

if new = "0" then
low led1 : low led2
endif

goto main