Using PORTA as output

Closed Thread
Results 1 to 6 of 6

Hybrid View

  1. - 8th January 2007, 12:01 #1
    microcozmoz's Avatar
    microcozmoz
    microcozmoz is offline Junior Member
    Join Date
    Oct 2004
    Posts
    7

    Did you find this post helpful? Yes | No

    Default

    This code is only for example.Change High PORTA.5 to High PORTA.0 ...
  2. - 8th January 2007, 12:34 #2
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Default Rtfds !!!

    Hi, µcosmos

    a look at the datasheet could show you the reason why ...

    See table 3.2 " Pinout assignment " ... or table 5.1 !!!

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  3. - 8th January 2007, 13:07 #3
    microcozmoz's Avatar
    microcozmoz
    microcozmoz is offline Junior Member
    Join Date
    Oct 2004
    Posts
    7

    Did you find this post helpful? Yes | No

    Default

    Thank you for your advice!! I must rtfds....
  4. - 8th January 2007, 13:13 #4
    sayzer's Avatar
    sayzer
    sayzer is offline SuperMod
    Join Date
    Jan 2006
    Location
    Istanbul
    Posts
    1,185

    Did you find this post helpful? Yes | No

    Default

    When using HIGH or LOW commands, it does not matter whether the pin is registered to be as an input or output pin.

    HIGH and/or LOW already set the pin as an output pin.

    Just make sure that the pin is not an input only pin.


    ----------------------
« Previous Thread | Next Thread »

Similar Threads

  1. Bit Banging input to output on PIC16F876A
    By Bronurstomp in forum mel PIC BASIC Pro
    Replies: 12
    Last Post: - 26th June 2008, 19:50
  2. Serious Serial Situation Setbacks...
    By Dansdog in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 7th February 2007, 03:46
  3. HSEROUT Newbie question/problem
    By Mark Scotford in forum mel PIC BASIC Pro
    Replies: 12
    Last Post: - 11th July 2006, 14:44
  4. Output PIC module
    By freelancebee in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 12th September 2005, 20:10
  5. Can anyone help a beginner in a struggle?
    By douglasjam in forum mel PIC BASIC
    Replies: 1
    Last Post: - 5th May 2005, 23:29

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules