JDM type programmer problem...

[bearpawz]

here is a picture of the programmer.. At least I think.. not quite sure how to insert a picture into this here message board so its attached...


It also seems that after playing around with the settings in IC-PROG I got it to work again. It seems like as long as I dont have to reboot Im ok. Just a couple of chips will not erase and they are probably blown or something.

[mvs_sarma]

here is a picture of the programmer.. At least I think.. not quite sure how to insert a picture into this here message board so its attached...


It also seems that after playing around with the settings in IC-PROG I got it to work again. It seems like as long as I dont have to reboot Im ok. Just a couple of chips will not erase and they are probably blown or something.

Hi Bearpawz,

That is comfortable. Doon't suspect the chips . they will also work. indicate their numbers.

next, in the user manual( if given) do you have the schematic? if so you may take a digital photo of that in a document mode with camerA SET TO LOWEST mPIXEL POSSIBLE. and save it in PC as prog.jpg
Keep a file copy ready at a known folder for uplinking. (say desk top)

now you know how to post it. ensure that the jpg is minimized by using 'stretch/skew of PAINT' in windows. there may be other methods.