GP2 on a 10F202 as output

Closed Thread
Results 1 to 15 of 15

Hybrid View

  1. - 7th January 2007, 12:03 #1
    mat janssen's Avatar
    mat janssen
    mat janssen is offline Member
    Join Date
    Oct 2003
    Location
    holland
    Posts
    251

    Did you find this post helpful? Yes | No

    Default

    @ Skimask:
    I read that part. Thats why I put in the programm :OSCCAL.0 = 0

    @ Mister_e:
    You win the price. That helped.
    I read also that the option reg bit 5 should be 0 , but I wrote at that time in my programm OPTION.5 = 0 , and the compile gave me an error. I forgot to type it in the correct way.
    Thanks.
    Regards
    Mat
  2. - 7th January 2007, 12:11 #2
    mister_e's Avatar
    mister_e
    mister_e is offline Contributor
    Join Date
    Sep 2004
    Location
    montreal, canada
    Posts
    6,898

    Did you find this post helpful? Yes | No

    Default

    yup OPTION.5 won't work unless you decide to redefine it
    Code:
    @OPTION=OPTION_REG
OPTION VAR BYTE EXT
    ' or the simple one
OPTION VAR OPTION_REG
    Doesn't help if you don't know OPTION_REG

    In this case you could still open the filename.ASM file, there you'll have...
    Code:
    R0              		EQU	RAM_START + 000h
R1              		EQU	RAM_START + 002h
R2              		EQU	RAM_START + 004h
FLAGS           		EQU	RAM_START + 006h
R4              		EQU	RAM_START + 007h
R3              		EQU	RAM_START + 008h
GOP             		EQU	RAM_START + 00Ah
OPTION_REG      		EQU	RAM_START + 00Bh
RM1             		EQU	RAM_START + 00Ch
RR1             		EQU	RAM_START + 00Dh
SOFT_STACK_PTR  		EQU	RAM_START + 00Eh
TRISIO          		EQU	RAM_START + 00Fh
SOFT_STACK      		EQU	RAM_START + 010h
    Last edited by mister_e; - 7th January 2007 at 12:27.
    Steve

    It's not a bug, it's a random feature.
    There's no problem, only learning opportunities.
  3. - 7th January 2007, 12:23 #3
    mat janssen's Avatar
    mat janssen
    mat janssen is offline Member
    Join Date
    Oct 2003
    Location
    holland
    Posts
    251

    Did you find this post helpful? Yes | No

    Talking

    I know, but still !!
  4. - 21st January 2011, 01:04 #4
    n0yox's Avatar
    n0yox
    n0yox is offline Junior Member
    Join Date
    Mar 2008
    Posts
    59

    Did you find this post helpful? Yes | No

    Cool 10f202

    I can not seem to program a 10f202 I always get "programming error at 0000" however if I read it I can write the info back to the chip?
  5. - 21st January 2011, 04:52 #5
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by n0yox View Post
    I can not seem to program a 10f202 I always get "programming error at 0000" however if I read it I can write the info back to the chip?
    Code?
    What are you reading from the chip ?
    Dave
    Always wear safety glasses while programming.
  6. - 21st January 2011, 05:22 #6
    mister_e's Avatar
    mister_e
    mister_e is offline Contributor
    Join Date
    Sep 2004
    Location
    montreal, canada
    Posts
    6,898

    Did you find this post helpful? Yes | No

    Default

    Sound high likely an ICSP problem. Which programmer & Software?

    Did you tried on a Ziff socket? Are your sure your ICSP circuit is properly implemented?
    Steve

    It's not a bug, it's a random feature.
    There's no problem, only learning opportunities.
  7. - 21st January 2011, 06:15 #7
    n0yox's Avatar
    n0yox
    n0yox is offline Junior Member
    Join Date
    Mar 2008
    Posts
    59

    Did you find this post helpful? Yes | No

    Cool 10f202

    I am using an epic plus programmer ver.4.22 and picbasicpro ver 2.50. I have a homemade programming adapter. I can read the blank chip "all 0fff" and the calibration register. I can load the hex file that I just read but can not load the hex files I create. I have no problem with other micros, however this is the only micro I just this program adapter with?

    Thank you for your help!
« Previous Thread | Next Thread »

Similar Threads

  1. Help changing CCP3 output pin
    By ChrisHelvey in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 15th July 2008, 02:30
  2. Bit Banging input to output on PIC16F876A
    By Bronurstomp in forum mel PIC BASIC Pro
    Replies: 12
    Last Post: - 26th June 2008, 19:50
  3. Serious Serial Situation Setbacks...
    By Dansdog in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 7th February 2007, 03:46
  4. Using LEDs as light sensors
    By skimask in forum Code Examples
    Replies: 3
    Last Post: - 30th December 2006, 22:19
  5. HSEROUT Newbie question/problem
    By Mark Scotford in forum mel PIC BASIC Pro
    Replies: 12
    Last Post: - 11th July 2006, 14:44

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules