Presetting Configuration Fuses (PIC Defines) into your Program

[Ioannis]

These configs are for the PM assembler.

Which assembler are you using? Also which version of PBP?

The inc is not to be included. But you can open it and see what are the configuration words exaclty.

I would recommend using MPASM as an assembler and the syntax of your compiler.

Ioannis

[LakisFM1]

Nop ,
these configs are for the MPASM assembler - which i use ,
since PM (of the PBP 2.60c i use) does not support the 12F1822.

ps. just saw you're from Thessaloniki too
so , Kalo Sabbatokyriako ! 'Good Weekend

[Ioannis]

Ooops yes, thats is MPASM but the syntax was not correct.

Try this

ASM
   __config _CONFIG1, _FOSC_INTOSC
ENDASM

Yes, I am located in Thessaloniki

Ioannis

[LakisFM1]

Overwriting previous address contents (8007)

[LakisFM1]

Problem solved!

I had to use

ASM
__CONFIG _CONFIG1, _FOSC_INTOSC & _WDTE_OFF & _PWRTE_ON & _MCLRE_OFF & _CP_OFF & _CPD_OFF & _BOREN_OFF & _CLKOUTEN_OFF & _IESO_OFF & _FCMEN_OFF
__CONFIG _CONFIG2, _WRT_OFF & _PLLEN_OFF & _STVREN_OFF & _BORV_19 & _LVP_OFF

ENDASM

and the trick was to ";" comment out the __CONFIG in M12F1822.INC file in the PBP directory , because it conflicted.