USBDemo, something to learn USB a little bit

Closed Thread
Results 1 to 40 of 279

Hybrid View

  1. - 13th July 2007, 14:14 #1
    Johan's Avatar
    Johan
    Johan is offline Junior Member
    Join Date
    Jun 2007
    Posts
    56

    Did you find this post helpful? Yes | No

    Default

    I am looking for this trough hole plcc socket, could anyone help which type , or digikey/mouser part number

    Thanks


  2. - 13th July 2007, 14:36 #2
    Darrel Taylor's Avatar
    Darrel Taylor
    Darrel Taylor is offline Fanatical Contributor
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Did you find this post helpful? Yes | No

    Default

    http://www.mikroe.com/en/tools/plcc/
    DT
  3. - 13th July 2007, 14:41 #3
    Johan's Avatar
    Johan
    Johan is offline Junior Member
    Join Date
    Jun 2007
    Posts
    56

    Did you find this post helpful? Yes | No

    Default

    Thanks Darrel, but I need the PLCC socket only, not the whole adapter, what make/ type is it ?

    It is smaller than normal PLCC44 socket

    Johan
« Previous Thread | Next Thread »

Similar Threads

  1. Bits, Bytes Words and Arrays
    By Melanie in forum FAQ - Frequently Asked Questions
    Replies: 24
    Last Post: - 14th June 2016, 08:55
  2. How to receive stream of bytes using PIC USART
    By unifoxz in forum mel PIC BASIC Pro
    Replies: 34
    Last Post: - 20th June 2009, 11:38
  3. How can I adjust in USBDemo A/D converter from 8 to 10 Bit resolution?
    By Kuba230 in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 31st July 2008, 09:56
  4. PICBasic newbie problem
    By ELCouz in forum mel PIC BASIC Pro
    Replies: 32
    Last Post: - 12th February 2008, 01:55
  5. USART interrupt not interrupting right
    By Morpheus in forum mel PIC BASIC Pro
    Replies: 12
    Last Post: - 6th March 2005, 02:07

Members who have read this thread : 1

You do not have permission to view the list of names.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules